Had some troubles with the IP...

Well, certainly more than SOME. Some of the tabs are quite annoying

I had trouble with the medpack, armory, onos, lerk, gorge, comm chair, IP, and the res node.

The armory and onos were easy in comparison to the ip. I couldn't even get my fingers to the tabs, and if I did they turned to dust when I touched them (Not really, but you get my point).

The onos was easier? I guess that was my mistake. I thought the ip would be the easiest because it was only one piece. Oh well.. (and in case you were wondering, I didn't change the scale of the ip- that's how big it is when you print it on a full sheet of paper)

I'm not sure what I'm going to do next. I'm thinking of another ip or cc (but in colour this time, now that I've got a new printer) or possibly one of the onos/lerk/gorge.

id advise you to start with the onos, as i found it fairly simple. i wish i had, i did the cc then went onto the lerk. which is about 5x harder imoi started the gorg now but kinda bored of it, i want the HA marine! Cmon zycar its looked nearly ready in the pics it cant be far off

Well good work, ive done ip ,well done c3 im printing out cc.. hope its less fiddly than that blasted ip ... hope both sheets are proportial as well

i want to do onos .. look a bit hard though and so does the lerk, too amny small peices, cc ahs just finnished. c u l8rs with pic of them both - hopfully


-Mag

Just image if we could print them on carton boards so when we would build them they would be almost true life sized !!!

After that, you could put them around in a room and have an NS party !!!

The paper cut thing is a great ideas for us NS fans !!!

Good job !

hey everybody .. here is my Heavy













PAPERCRAFT IS ON THE WAY ..
NEED JUST LITTLE CORRECTION BUT HOPE ON MONDAY IS HERE !

WOOHOOOOOOO!1111 nice work.


Now some folding guides for the dummies like me under us, and we will have our own NS paper collection

Just step by step, like the ehh Lego guides eh?

wow ZycaR rocks!!

WOW!!

Awesome. Now to find the many hours of spare time I need to build these things.

zycar how about scaling the papercraft up to 2 times the size as well as a smaller one ? as i suck with stuff like that and want a really big ha =[

If you wana realy big HA .. I can render realy big Image for you ..

and you can print one piece on one A4 paper ..
It's just coupe of minutes work in any paint program which can cut/paste parts of raster image ..

or I can send you (*.max) & (*.bmp) files with prepared (unfolded) model and bitmap file with model texture ..
and you can render it in any resolution piece by piece

this files are result of [Glue flaps] step before rendering fiunal image in my guide :
HA papercraft creating GUIDE

Holy pants. If you sir can provide us with those rescaled parts, then you'll have to suffer my hot man love action.

I just recently built Metal Gear Rex again (E3 papercraft) and am interested in anything GLORIOUS

HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA



I was bored and made a sig out of it if anyone wants it.

ya I want that HA w/ flaps and instructions so any noob can build lol

[ HEAVY ]

all three pages :

( 1/3 )

[ Hi-Res image ]

( 2/3 )

[ Hi-Res image ]

( 3/3 )

[ Hi-Res image ]

(now .. It need some reference pictures and guide to build )

but you can start building you own marine ..
tomorow I can add blue skinned one - I love blue HA marine !!!

WOOT

That HA looks far too complex for my teeny brain to understand. I'ma do the marine structures first.
Pssst: Can we have a TF? Or a PG? What about a res tower (scaled to fit the res node)

ok, here is an updated pack

added the HM (3 images) and armory (1 image)

titanfusion.net/downloads/NS-papercut.zip 31.4 MB

So.... many.... pieces... my brain is melting, my brain is melting!!!!!!

Is it possible to make a really big life sized Mine papercut?


So I could make them and then stick them all over my friends door with double stick tape.

And then you could stick a laser pointer in it, to make the illusion complete.

Nice work on the HA, btw. If I ever get any good at these things, I'll build one.

i spose you dont HAVE to made it with moving parts right ? could just glue it ?

But then you can't have a gorgeh rodeo! Although the hinge things do look hard.

ya wth do u make the hinges with? There should be a list of needed tools lol

The hinges are paper too. I just don't know how to connect the pieces.

with red cross are marked holes for wooden parts
(that browns parts: HJ5, EJ4, LJ1, KJ4, 12 ...)

from gray parts (like 11, Lj2, HJ4, ...) you make tubes for both sides of wooden part .. it's gray squares on reference pictures ...

zycar how long did it take you to physically build the ha marine ??

build or cheare for 3D model ?

form 3D model to paper .. 3 days .. with reference pictures

building from paper .. something about 10 hours ..

It's not hard .. ONOs is harder
Just don't forget make it precise as can be

I found the onos easier to figure out. BTW, how's that guide coming along Julien? I still can't figure out how to get the entire head glued to the body.

10 hours omg, think ill make it with out the joints

Atom .. don't be stupid.. you must create all parts too ..
- one tip at start :
All parts between joints make first to final figure .. like "L1" or "L2"
and after that you make final joint "KJ1 - KJ4"
and after you got all this three complex thinks -foot, -thigh, -joint
.. just glue it to final figure of leg



BTW: HA with joints can ride on gorg


and do many thinks ...

Now I try making ShotGun and Heavy Machine Gun for Heavy ...

can sum1 make Gordan freeman, possibly with crowbar for old times sake:x cant be too hard can it ?

So Zycar, what's next on the list? (I mean after the shotgun/hmg) Any chance of getting a skulk?

i have a request to Zycar. Not regarding NS. Can you make a model of this plane (B17) from battlefield 1942?

http://images.google.com.sg/images?hl=en&l...efield+1942+B17

I will be totally grateful for that.

Awesome work Zycar and C3!

oh em gee

damn this is some nice work!! i'd love to see more of this, i'll try to build some of the models myself

Zycar, is it possible to make a scaled version of the HA so that it fits the other models (in size) ?

life sized model of a trip mine

or at least lost of mini ones i can stick to my pc. nehehehee...

Can someone collect all the papercuts that have been made so far and zip them down, upload and post link ?

that one contains the 'old' slightly over-sized armory though

Make mini trip mines with those snapper firecrackers in the middle .

make a pack which you can DL with ALL the models!

I'm working ont he pule rifle still (DAMN IT'S HARD!!!) and I'll make these all asap, and stage a mini-battle!

Just make sure to make full sized weapons and then some to fit the mini-marines!


Erm... on that note- are the miniatures to scale with one another? If not, can you resize them easily? If so, can you do it so that I may make a kick butt battle scene? (make the onos like, stand at least 5 inches tall, so that the guns aren't like, 1 cm by 4 cm 0o')

Zycar, my brother requests a Tux papercraft.



Oh and I'm making my gorge right now, thanks for that will post when done.