** Executing...
** Command: Change Directory
** Parameters: C:\Program\Steam\steamapps\pangpinne\condition zero


** Executing...
** Command: Copy File
** Parameters: "C:\Program\Valve Hammer Editor\maps\Testbana.map" "C:\Program\Steam\steamapps\pangpinne\condition zero\czero_swedish\maps\Testbana.map"


** Executing...
** Command: C:\Program\VALVEH~1\hlcsg.exe
** Parameters: "C:\Program\Steam\steamapps\pangpinne\condition zero\czero_swedish\maps\Testbana"

hlcsg v3.4 Final (Feb 25 2006)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (amckern@yahoo.com)
----- BEGIN hlcsg -----
Command line: C:\Program\VALVEH~1\hlcsg.exe "C:\Program\Steam\steamapps\pangpinne\condition zero\czero_swedish\maps\Testbana"
Entering C:\Program\Steam\steamapps\pangpinne\condition zero\czero_swedish\maps\Testbana.map

Current hlcsg Settings
Name | Setting | Default
---------------------|-----------|-------------------------
threads [ 2 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ off ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
max lighting memory [ 6291456 ] [ 6291456 ]
priority [ Normal ] [ Normal ]

noclip [ off ] [ off ]
null texture stripping[ on ] [ on ]
clipnode economy mode [ on ] [ on ]
clip hull type [ legacy ] [ legacy ]
onlyents [ off ] [ off ]
wadtextures [ on ] [ on ]
skyclip [ on ] [ on ]
hullfile [ None ] [ None ]
nullfile [ None ] [ None ]
min surface area [ 0.500 ] [ 0.500 ]
brush union threshold [ 0.000 ] [ 0.000 ]

Using mapfile wad configuration
Wadinclude list :
[zhlt.wad]

0 brushes (totalling 0 sides) discarded from clipping hulls
CreateBrush:
50%... (0.02 seconds)
SetModelCenters:
50%... (0.00 seconds)
CSGBrush:
50%... (0.02 seconds)

Using Wadfile: \program\steam\steamapps\pangpinne\condition zero\czero_swedish\de_plaka.wad
- Warning: Larger than expected texture (348972 bytes): 'PI_GROUND1'
- Warning: Larger than expected texture (348972 bytes): 'ROTSGROND'
- Warning: Larger than expected texture (348972 bytes): '{GATE'
- Contains 2 used textures, 100.00 percent of map (83 textures in wad)

Texture usage is at 0.09 mb (of 4.00 mb MAX)
0.05 seconds elapsed

----- END hlcsg -----




** Executing...
** Command: C:\Program\VALVEH~1\hlbsp.exe
** Parameters: "C:\Program\Steam\steamapps\pangpinne\condition zero\czero_swedish\maps\Testbana"

hlbsp v3.4 Final (Feb 25 2006)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (amckern@yahoo.com)
----- BEGIN hlbsp -----
Command line: C:\Program\VALVEH~1\hlbsp.exe "C:\Program\Steam\steamapps\pangpinne\condition zero\czero_swedish\maps\Testbana"

Current hlbsp Settings
Name | Setting | Default
-------------------|-----------|-------------------------
threads [ 2 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ off ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
priority [ Normal ] [ Normal ]

noclip [ off ] [ off ]
nofill [ off ] [ off ]
noopt [ off ] [ off ]
null tex. stripping [ on ] [ on ]
notjunc [ off ] [ off ]
subdivide size [ 240 ] [ 240 ] (Min 64) (Max 512)
max node size [ 1024 ] [ 1024 ] (Min 64) (Max 8192)


SolidBSP [hull 0] 39 (0.00 seconds)
Warning: === LEAK in hull 0 ===
Entity info_player_start @ ( 448,-256,-128)
Error:
A LEAK is a hole in the map, where the inside of it is exposed to the
(unwanted) outside region. The entity listed in the error is just a helpful
indication of where the beginning of the leak pointfile starts, so the
beginning of the line can be quickly found and traced to until reaching the
outside. Unless this entity is accidentally on the outside of the map, it
probably should not be deleted. Some complex rotating objects entities need
their origins outside the map. To deal with these, just enclose the origin
brush with a solid world brush

Leak pointfile generated

SolidBSP [hull 1] 39 (0.00 seconds)
Warning: === LEAK in hull 1 ===
Entity info_player_start @ ( 448,-256,-128)
SolidBSP [hull 2] 40 (0.00 seconds)
Warning: === LEAK in hull 2 ===
Entity info_player_start @ ( 448,-256,-128)
SolidBSP [hull 3] 39 (0.00 seconds)
Warning: === LEAK in hull 3 ===
Entity info_player_start @ ( 448,-256,-128)
0.11 seconds elapsed

----- END hlbsp -----




** Executing...
** Command: C:\Program\VALVEH~1\hlvis.exe
** Parameters: "C:\Program\Steam\steamapps\pangpinne\condition zero\czero_swedish\maps\Testbana"

hlvis v3.4 Final (Feb 25 2006)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (amckern@yahoo.com)
----- BEGIN hlvis -----
Command line: C:\Program\VALVEH~1\hlvis.exe "C:\Program\Steam\steamapps\pangpinne\condition zero\czero_swedish\maps\Testbana"
>> There was a problem compiling the map.
>> Check the file C:\Program\Steam\steamapps\pangpinne\condition zero\czero_swedish\maps\Testbana.log for the cause.

----- END hlvis -----




** Executing...
** Command: C:\Program\VALVEH~1\hlrad.exe
** Parameters: "C:\Program\Steam\steamapps\pangpinne\condition zero\czero_swedish\maps\Testbana"

hlrad v3.4 Final (Feb 25 2006)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (amckern@yahoo.com)
----- BEGIN hlrad -----
Command line: C:\Program\VALVEH~1\hlrad.exe "C:\Program\Steam\steamapps\pangpinne\condition zero\czero_swedish\maps\Testbana"
>> There was a problem compiling the map.
>> Check the file C:\Program\Steam\steamapps\pangpinne\condition zero\czero_swedish\maps\Testbana.log for the cause.

----- END hlrad -----




** Executing...
** Command: C:\Program\Steam\STEAMA~1\PANGPI~1\CONDIT~1\hl.exe
** Parameters: +map "Testbana"




____________________________________________











What's wrong? I don't get it. What should I change to make this work? If you want printscreen och my Configurations(not sure if they are added correctly) then just write that I'm trying to make a map for Condition Zero. I have googled around on some sites and can only find for 1.6. Does it matter if steam not is located in C:\Program Files\Valve\Steam... My steam is located in C:\Program Files\Steam\... and so on. Please help me

Looks like there is a leak (a hole to the outside 'void') in your map. I think that's what causing it.

Here's a tip: Click on 'Map' and then 'Load pointfile', if the file exists (it SHOULD make one if you have a leak) then follow the red line that appears leading to the hole in your map. It's how I solve leaks most of the time.

Also, this article may help you: http://collective.valve-erc.com/index.php?...750093-52533100

Ah the great leak annoyance of bsp tree engines

Well If you want to know how I find them leaks. I have basically 3 techniques:

1. What ChuckstarNL posted (I'm not always succesfull with it), I do change the hammer 3dwindow background color to magenta (255 0 0) so I can see the void from inside the map (floating trough it in the 3d window)
   
2. Compiling the level without vis and rad and going into the game in developer mode and also enabling + disabling dev_overview (type dev_overview 1 in the console and then type dev_overview 1 on the console)
   
   If you've done this there will be a green backplane which can highlight a lot of potential cracks in you level. Basically (I play hl1 in a window) I walk around and keep alt+tabbing between hammer and hl to have a look at things that look odd in the compiled map to see what it looks like in the editor.
   
   
3. You need Object Viewer for this. You compile the level without vis and rad and open the *.bsp in the Object Viewer. Now change the rendermode to solid or x-ray and have a look at potential leaks. I prefer x-ray because it gives me personally a better view of the brushes (again this is personal

You can get Object Viewer here clickey, I see nem renamed it to BSP Viewer, its the same program though...


Hope this helps a bit, leaks are annoying as hell, especially the ones that are 1grid*1grid*1grid

Also how large are those textures?

- Warning: Larger than expected texture (348972 bytes): 'PI_GROUND1'
- Warning: Larger than expected texture (348972 bytes): 'ROTSGROND'
- Warning: Larger than expected texture (348972 bytes): '{GATE'

I think you get that warning when you have textures of 512*512 or higher, HL1 can handle them though... Just make sure you don't use a lot of them at a scaled down size in a detailed area

hehe, I got thousand of redlines on the 3 pics. Should I make a new block over the leak where the red line points? or what is a ''leak'' more exactly?

Yep, I used block tools to use blocks around the walls. Now it just says Could not find Filesystem dll to load.


I copy the test in again and you may see. As you also said, I got some warnings. I used de_plaka wad files and there is 83 wad files in that one. What to do about that?



** Executing...
** Command: Change Directory
** Parameters: C:\Program\Steam\steamapps\pangpinne\condition zero


** Executing...
** Command: Copy File
** Parameters: "C:\Program\Valve Hammer Editor\maps\Testbana.map" "C:\Program\Valve Hammer Editor\maps\Testbana.map"


** Executing...
** Command: C:\Program\VALVEH~1\hlcsg.exe
** Parameters: "C:\Program\Valve Hammer Editor\maps\Testbana"

hlcsg v3.4 Final (Feb 25 2006)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (amckern@yahoo.com)
----- BEGIN hlcsg -----
Command line: C:\Program\VALVEH~1\hlcsg.exe "C:\Program\Valve Hammer Editor\maps\Testbana"
Entering C:\Program\Valve Hammer Editor\maps\Testbana.map

Current hlcsg Settings
Name | Setting | Default
---------------------|-----------|-------------------------
threads [ 2 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ off ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
max lighting memory [ 6291456 ] [ 6291456 ]
priority [ Normal ] [ Normal ]

noclip [ off ] [ off ]
null texture stripping[ on ] [ on ]
clipnode economy mode [ on ] [ on ]
clip hull type [ legacy ] [ legacy ]
onlyents [ off ] [ off ]
wadtextures [ on ] [ on ]
skyclip [ on ] [ on ]
hullfile [ None ] [ None ]
nullfile [ None ] [ None ]
min surface area [ 0.500 ] [ 0.500 ]
brush union threshold [ 0.000 ] [ 0.000 ]

Using mapfile wad configuration
Wadinclude list :
[zhlt.wad]

0 brushes (totalling 0 sides) discarded from clipping hulls
CreateBrush:
70%... (0.00 seconds)
SetModelCenters:
50%... (0.02 seconds)
CSGBrush:
70%... (0.03 seconds)

Using Wadfile: \program\steam\steamapps\pangpinne\condition zero\czero_swedish\de_plaka.wad
- Warning: Larger than expected texture (348972 bytes): 'PI_GROUND1'
- Warning: Larger than expected texture (348972 bytes): 'ROTSGROND'
- Warning: Larger than expected texture (348972 bytes): '{GATE'
- Contains 2 used textures, 100.00 percent of map (83 textures in wad)

Texture usage is at 0.09 mb (of 4.00 mb MAX)
0.06 seconds elapsed

----- END hlcsg -----




** Executing...
** Command: C:\Program\VALVEH~1\hlbsp.exe
** Parameters: "C:\Program\Valve Hammer Editor\maps\Testbana"

hlbsp v3.4 Final (Feb 25 2006)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (amckern@yahoo.com)
----- BEGIN hlbsp -----
Command line: C:\Program\VALVEH~1\hlbsp.exe "C:\Program\Valve Hammer Editor\maps\Testbana"

Current hlbsp Settings
Name | Setting | Default
-------------------|-----------|-------------------------
threads [ 2 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ off ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
priority [ Normal ] [ Normal ]

noclip [ off ] [ off ]
nofill [ off ] [ off ]
noopt [ off ] [ off ]
null tex. stripping [ on ] [ on ]
notjunc [ off ] [ off ]
subdivide size [ 240 ] [ 240 ] (Min 64) (Max 512)
max node size [ 1024 ] [ 1024 ] (Min 64) (Max 8192)


SolidBSP [hull 0] 83 (0.03 seconds)
BSP generation successful, writing portal file 'C:\Program\Valve Hammer Editor\maps\Testbana.prt'
SolidBSP [hull 1] 83 (0.02 seconds)
SolidBSP [hull 2] 82 (0.00 seconds)
SolidBSP [hull 3] 83 (0.02 seconds)
0.13 seconds elapsed

----- END hlbsp -----




** Executing...
** Command: C:\Program\VALVEH~1\hlvis.exe
** Parameters: "C:\Program\Valve Hammer Editor\maps\Testbana"

hlvis v3.4 Final (Feb 25 2006)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (amckern@yahoo.com)
----- BEGIN hlvis -----
Command line: C:\Program\VALVEH~1\hlvis.exe "C:\Program\Valve Hammer Editor\maps\Testbana"
4 portalleafs
3 numportals

-= Current hlvis Settings =-
Name | Setting | Default
-------------------|-----------|-------------------------
threads [ 2 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ off ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
max vis distance [ 0 ] [ 0 ]
priority [ Normal ] [ Normal ]

fast vis [ off ] [ off ]
full vis [ off ] [ off ]


BasePortalVis:
50%... (0.00 seconds)
LeafThread:
50%... (0.00 seconds)
average leafs visible: 0
g_visdatasize:12 compressed from 4
0.00 seconds elapsed

----- END hlvis -----




** Executing...
** Command: C:\Program\VALVEH~1\hlrad.exe
** Parameters: "C:\Program\Valve Hammer Editor\maps\Testbana"

hlrad v3.4 Final (Feb 25 2006)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to (amckern@yahoo.com)
----- BEGIN hlrad -----
Command line: C:\Program\VALVEH~1\hlrad.exe "C:\Program\Valve Hammer Editor\maps\Testbana"

-= Current hlrad Settings =-
Name | Setting | Default
--------------------|---------------------|-------------------------
threads [ 2 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ off ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
max lighting memory [ 6291456 ] [ 6291456 ]
priority [ Normal ] [ Normal ]

vismatrix algorithm [ Original ] [ Original ]
oversampling (-extra)[ off ] [ off ]
bounces [ 1 ] [ 1 ]
bounce dynamic light [ on ] [ on ]
ambient light [ 0.000 0.000 0.000 ] [ 0.000 0.000 0.000 ]
maximum light [ 255.000 ] [ 256.000 ]
circus mode [ off ] [ off ]

smoothing threshold [ 50.000 ] [ 50.000 ]
direct threshold [ 25.000 ] [ 25.000 ]
direct light scale [ 2.000 ] [ 2.000 ]
coring threshold [ 1.000 ] [ 1.000 ]
patch interpolation [ on ] [ on ]

texscale [ on ] [ on ]
patch subdividing [ on ] [ on ]
chop value [ 64.000 ] [ 64.000 ]
texchop value [ 32.000 ] [ 32.000 ]

global fade [ 1.000 ] [ 1.000 ]
global falloff [ 2 ] [ 2 ]
global light scale [ 1.000 1.000 1.000 ] [ 1.000 1.000 1.000 ]
global gamma [ 0.500 0.500 0.500 ] [ 0.500 0.500 0.500 ]
global light scale [ 1.000 ] [ 1.000 ]
global sky diffusion [ 1.000 ] [ 1.000 ]

opaque entities [ on ] [ on ]
sky lighting fix [ on ] [ on ]
incremental [ off ] [ off ]
dump [ off ] [ off ]

colour jitter [ 0.0 0.0 0.0 ] [ 0.0 0.0 0.0 ]
monochromatic jitter [ 0.0 0.0 0.0 ] [ 0.0 0.0 0.0 ]
softlight hack [ 0.0 0.0 0.0 0.0 ] [ 0.0 0.0 0.0 0.0 ]
diffuse hack [ on ] [ on ]
spotlight points [ on ] [ on ]

custom shadows with bounce light
[ off ] [ off ]
rgb transfers [ off ] [ off ]


[Reading texlights from 'C:\Program\VALVEH~1\lights.rad']
[59 texlights parsed from 'C:\Program\VALVEH~1\lights.rad']

132 faces
Create Patches : 1532 base patches
0 opaque faces
30378 square feet [4374528.00 square inches]
Error: No Lights!
Description: lighting of map halted (I assume you do not want a pitch black map!)
Howto Fix: Put some lights in the map.


----- END hlrad -----




** Executing...
** Command: C:\Program\Steam\STEAMA~1\PANGPI~1\CONDIT~1\hl.exe
** Parameters: +map "Testbana"








Now I also run CZ at the same time, so it said could not launch. But no red lines are left

For one thing, there are no lights. HL1 does not have a fullbright option like Source does. For another thing...I see three warnings about textures, then "2 used textures (100% of map)"...